KUHN GMD 600 G II, Руководство по сборке и эксплуатации

Страница: 38 / 48

- 36 -
OPTIONAL EQUIPMENT
1. Hydraulic adaptators (photo 50)
For fitting to different types of hydraulic connectors,
three adaptators are available :
M16 x 1.5 / 1/2 GAZ - CON 22 (823 012 05)
M16 x 1.5 / 1/2 NPT - 24 (823 012 06)
M16 x 1.5 / 3/4 UNF - JIC (823 019 02)
2. High cone
(kit No. 104 6170 for GMD 700
GII
)
(kit No. 104 6180 for GMD 700
GII - HD
)
To reduce swath width to 1.70 m - 1.80 m (approx. 5' 7" - 5' 11") on the GMD 700
GII /
700
GII - HD
, the second disc
can be replaced by a cone (C) (photo 51).
Tighten fixation bolts to 12 daNm / 88 ft.lbs.
3. Inside swath wheel
(kit No. 104 6100 for GMD 700
GII
)
(kit No. 104 6190 for GMD 700
GII - HD
)
On the GMD 700
GII
and GMD 700
GII - HD
an inside
swath wheel can be installed in conjunction with the
second high cone (C) (n° 104 6170 and n° 104 6180).
This set enables reducing the swath width to 1,55 m
(approx. 5').
The swath wheel
(I) is attached to the frame pipe with
2 screws (E) (M 12 x 20) and 2 conical spring washers,
as shown in photo 51.
Torque of screws : 12 daNm / 88 ft.lbs.
5 1