KUHN GMD 600 G II, Руководство по сборке и эксплуатации

Страница: 24 / 48

- 22 -
TRANSPORT
To transport the machine on public highways or from
one field to another, proceed as follows :
1) Disengage the PTO drive and wait for all
movement to stop.
2) Release lock by applying pressure with the box
spanner (A - arrow 1) supplied with the machine and
fold the front safety bar upwards (arrow 2) (photo
26) till it is automatically locked in transport posi-
tion.
3) Pull on the rope (F) to disengage the lifting stopper
(G) (photo 27).
4) Raise the machine with the tractor 3 point linkage.
5) Slowly raise the cutterbar vertically using the hy-
draulic cylinder. Slacken the tension on the rope
(F) as the cutterbar is being pivoted in the
vertical position. It will automatically be locked in
full transport position (photo 28) by the latch (C)
(photo 27).
WARNING : BEFORE PUTTING THE
MACHINE IN WORK OR TRANSPORT
POSITION, ENSURE ALL PERSONS
ARE WELL CLEAR OF THE
CUTTERBAR PIVOTING AREA.
BEFORE TRANSPORTING THE
MACHINE ON THE PUBLIC HIGH-
WAY, THE OPERATOR SHOULD
MAKE SURE THAT THE MACHINE
CONFORMS TO THE HIGHWAY
CODE.
The cord (F) (photo 27) must be pulled each time when raising the cutterbar in the full vertical
position.Slacken the tension on the rope as the cutterbar is being pivoted in the vertical
position.
THE OVERALL TRANSPORT HEIGHT MEASURED FROM THE GROUND MUST NOT EXCEED 4
METRES/13' (MAXIMUM HEIGHT AUTHORISED BY THE HIGHWAY CODE).
2 8
2 7
2 6