KUHN GMD 600 G II, Руководство по сборке и эксплуатации

Страница: 27 / 48

- 25 -
CUTTING HEIGHT
Maximum cutting height (50 mm / 2") (fig. 1) is
achieved when the discs are parallel to the ground.
Adjustment of cutting height is achieved by altering the
cutterbar tilt angle. This is effected by varying top link
length (H) (photo B) until desired cutting height is
achieved. To minimize blade and disc wear, improve
grass regrowth and get maximum nutritive value from
the crop, minimum cutting height should never be
adjusted less then 30 mm / 1 1/4" (fig. 2).
OUTER SWATH WHEEL
The angular position of the swath wheel
compared to the cutterbar can be adapted
to working conditions enabling a regular
flow of the cut crop towards the rear.
Position the swath wheel so that maxi-
mum angle (A') (fig. A) is obtained. In
difficult working conditions (long, dense,
bent over crops) position it towards mini-
mum angle (A) (fig. A).
ADJUSTMENTS
An adjustable cutting height from 35 to 90 mm can be obtained by replacing the end skids by 2 raised skid shoes
(see optional accessories).
B
A
MAXIMUM CUTTING
HEIGHT
MINIMUM CUTTING HEIGHT
Fig.1 Fig.2