KUHN GMD 600 G II, Руководство по сборке и эксплуатации

Страница: 21 / 48

- 19 -
1. Check that the 2 tractor 3-point lift rods (C) are
adjusted to an identical length.
2. Attach the lower links to the hitch pins and secure
with linchpins (A) (photo 16).
3. Attach the top link (P) using pin (D). Two positions
are available on the pin, depending on the diameter
of the ball joint, to secure the link to the mower.
4. Connect the hydraulic hose (X) to a single acting
outlet.
Note : A hitch pin (T) enabling direct attachment by
means of a quick hitch (N) is supplied with
GMD 800
GII
machines intented for North
America (photo 16 A). Mount the pin (T) on the
3-point frame using 2 roll pins (H) (diameter 10
x 45), as shown on photo 16 A.
A quick hitch mounting bracket enabling a
quick hitch to be attached to GMD 600
GII
/
700
GII
models is available as an optional
equipment (see page 39).
5. Lift the machine off the ground using the hydraulic
3-point lift, fold the parking latch (L) upwards (see
arrow) until it engages in the spring (E) (photo 17).
When working or transporting the disc mower, the
parking latch (L) must be locked, as shown on photo
17 A.
1 7
17A