Kugelmann Maschinenbau DUPLEX, Руководство по эксплуатации

Страница: 50 / 60

50
Operation of the spreader
Manual operation via flow divider block
In an emergency the control can be done manually through the flow divider block.The setting of the three hand
wheels (four for the damp feature option) is always the zero position. If this is not observed this leads to failures in
the operation of the electric control.
The rotation speed of the screw of the right spread chamber can be set through the right hand wheel. The hand
wheel to the left of it serves to set the rotational speed of the disc. To the left of this is the hand wheel for setting
the rotational speed of the right screw. For the option of damp salt equipment there is a fourth hand wheel on the
far left for the emergency operation of the brine pump.
Hand wheel
left screw
conveyor
Reverse key for
screw conveyors
Hand wheel
for spreading
disc emergency
operation
Hand wheel
brine pump
Hand wheel
for right screw
conveyors
To eliminate disturbances at the k-tronic control proceed as follows:
Turn hydraulic supply on.Turn k-tronic control on. Push screw conveyor reverse key (red or yellow) at Slave. The
direction of rotation is regulated by the control.
This operation is to be executed with utmost care.Check whether the chute is free from blockages.
With the MCSS3/4 proceed as follows. Switch hydraulic supply on. At the MCSS3/4 control switch on the working
lights. Set the hand wheel of the blocked screw conveyor to a value of about 5 to 6. Turn the toggle switch opf the
reverse to the corresponding side.
Subject to changes
English