Kugelmann Maschinenbau DUPLEX, Руководство по эксплуатации

Страница: 34 / 60

E
ngl
is
h
34
Mounting, dismounting of the spreader
Mounting with spider
Remove the platform of the carrying vehicle (see operating instructions of the producer)
In case of a tip truck platform, retract the telescopic cylinder and secure it against unintended use.
Close the stop valve. Disassemble the stop valve or fix the stop valve in closed condition for example with cable
straps.
Clean the support points of the intermediate frame of the platform. Through contamination at these
points fixing of the spreader can be prevented, or the intermediate platform frame or the spreader can be
damaged.
D rive under the spreader such that the tilt trays of the spider are directly above the ball points of the intermediate
frame of the platform.
The persopn who serves as guide must never be between the spreader and the carrying
vehicle.
So that the hydraulic pipes and hoses are not torn off, bind them upward bevore you drive
under the spreader.
Remove safety elements from the tilt trays.
Put the spreader slowly down on the carrying vehicle. Lower the spreader with all tripods evenly.
Secure the put down spreader at the back tilt trays with the appropriate bolts and at the front tilt trays with the
appropriate screws and security nuts.
Subject to changes