Kugelmann Maschinenbau DUPLEX, Руководство по эксплуатации

Страница: 31 / 60

E
ngl
is
h
Chapter 04
31
www.kugelmann.com
Now drive backwards until the folding coulumns fold upwards.
If the columns are folded lower, the tip truck dumping body
to about 5° to 7°.
Drive back further until the back edge of the tip truck
dumping body is at the stop plates of the rolling frame.
Let the tip truck dumping body down completely. Weight is
thus taken off the back supports.
Lift both support arms up with a hooked up cable winch.
Secure the lifted supports with both positioning bolts. Secure the positioning bolts with the respective splints.
To pull the positioning bolts lift the supports slightly with the cable winch.
The vehicle lighting must not be covered.
Tie down the spreader on the tip truck dumping body with the supplied lifting tackle.
Insert the hydraulic pipes.
Insert the electric cables into the socket boxes.
Never remove the loading flaps on the side or drive with or lowered loading flaps while the
spreader is mounted.
Subject to changes