background image

22 

Technical date, euqipment 

Special equipment, additional equipment, options 

Electric spread pattern adjustment (ESP) 

The electric spread pattern adjustment (ESP) increases comfort.The operator can adjust the spread pattern from 
the driver’s cab more to the right or to the left.  

Damp salt equipment 

The damp salt equipment as an additional equipment allows moistening of the spreading material with brine.This 
saves spreading material and is friendlier to the environment. The damps salt equipment is so optimally placed 
that the centre of gravity of the spreader is even lower.  

Mountable kits 

Various mountings are possible (mounting kits):  

Mounting is on the platform,whereby the spreader is fixed with lashing straps. 

Weight can be saved through mounting with an intermediate frame (spider). Thereby the tip truck platform and 
fixing with lashing straps are not required. The spider is held directly by the ball holders of the tip truck platform. 

A support tripod offers the opportunity to to dismaount the spreader within a short time. Depending on the 
spreader two size types are available  

Spreaders of a nominal volume of 4 m³ and more are preferably delivered on a rolling frame.

English 

Содержание DUPLEX





























































Отзывы: