Kugelmann Maschinenbau DUPLEX, Руководство по эксплуатации

Страница: 30 / 60

E
ngl
is
h
30
Mounting, dismounting of the spreader
Roll-Fix
Mounting of the spreader
The tip truck dumping body is to be cleaned
before mounting the spreader. The tip
truck dumping body and the speader could
be damaged through remaining material.
Pay attentiion that hydraulic pipes and connecting cables of the spreader are not hanging
down and could thus be torn off during mounting of the Roll-Fix.
Lift tip truck dumping body slightly (about 15° to 20°).
If the angle of the tip truck dumping body is too high the
spreader could move backwards during mounting.
If the angle is too small, the folding columns cannot be folded,
because the columns are still resting on the gorund or the lever for
folding is too unfavourable. There is the danger that the spreader is
pushed backwards.
Drive slowly, centred and straigt under the spreader until the laterally attached indicators fold in.
The back edge of the tip truck dumping body must not touch the folding columns.
When putting down the spreader always take a second
person as a guide.
If the front rolls of the rolling frame lie on the tip truck dumping body,
remove the safety bolts of the folding columns.
The safety bolts can be removed from outside. Never stand
under the spreader when the safety bolts are pulled out.
Subject to changes
E