13
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: 104706 PRODUCT CODE: 51381 10/2015
• Make sure the appliance is disconnected from the power supply. Wash the
removable parts and accessories (baking tin, kneading paddles, ingredient
dispenser, measuring spoon and cup, and the hook) with a soft sponge
in warm water and a little washing-up detergent to remove any dust from
transport. Do not use any abrasives in order not to damage the non-stick
coating. Rinse with clean water and dry thoroughly.
• Reinsert the baking tin firmly into the process chamber until it clicks
securely into place. If it does not seem to fit properly, or gets stuck at an
angle, move the tin a little and press down firmly on both sides of the rim
until it clicks securely into place.
• Place the kneading paddles onto the spindles inside the baking tin (Fig. 1).
They only fit one way.
• Close the lid and install the automatic ingredient dispenser back in its
place (Fig. 2).
• Your new bread maker is now ready for use.
Getting Started (Cont.)
Fig. 1
Fig. 2
