5
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: 104706 PRODUCT CODE: 51381 10/2015
General Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
Read this manual thoroughly before first use
, even if you are familiar with this
type of product. The safety precautions enclosed herein reduce the risk of fire,
electric shock and injury when correctly adhered to.
Keep the manual in a safe
place for future reference
, along with the completed warranty card, purchase
receipt and carton. If applicable, pass these instructions on to the next owner of
the appliance.
Always follow basic safety precautions and accident prevention measures when
using an electrical appliance, including the following:
• Correct voltage:
Make sure your local outlet voltage and circuit frequency
correspond to the voltage indicated on the appliance rating label. If it does not
match, contact the after sales support line and do not use the appliance.
• Safe connection:
Connect the appliance to a properly earthed mains socket.
Insert the plug properly into the mains socket. Do not alter the plug.
• Do not immerse:
To protect against electric shock, do not immerse the cord,
plug or the appliance itself in water or other liquid. Only clean these parts
with a damp cloth; never wash the motor housing in water. If the appliance is
accidentally immersed, immediately unplug it, dry it and have it checked by
qualified service personnel.
• Moisture:
Ensure your hands are dry before handling the plug or switching on.
Do not use the appliance next to a kitchen sink.
• Protect the power cord:
Do not kink, squash or strain the power cord and
protect it from sharp edges and heat. Do not let it hang over the edge of a
benchtop; do not place anything on top of the cord. Do not wrap it around the
appliance, and never pull the cord to lift up, carry or unplug the appliance.
• No extension cord or adaptor:
Fully unwind the power supply cord before us-
ing the appliance. Do not use this appliance with an extension cord or adaptor.
• Check the power cord:
Check the power cord regularly for visible damage. If
it is damaged, it must be replaced by the manufacturer, its authorised service
centres or similar qualified personnel in order to avoid any hazards.
• Do not use when damaged:
Do not pick up or operate an appliance with
a damaged cord or plug, or after the appliance malfunctions or has been
dropped or damaged in any manner. A damaged cord must be replaced by
the manufacturer or a qualified person in order to avoid a hazard. In case of
damage, contact our after sales support line for advice.
Electrical safety and cord handling
