30
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: 104706 PRODUCT CODE: 51381 10/2015
FAQs and Troubleshooting Guide (Cont.)
Malfunction
Do not use the appliance in case of a malfunction or when the power cord is
damaged. In such a case, contact our after sales support centre for advice.
ERROR MESSAGES
You can start a new program immediately after the previous one. However, it
is possible that the LCD screen displays E01 or E00 when you press START
and the machine sounds an alarm signal.
• [ E01 ]
indicates that the temperature in the process chamber is still too
high after the previous baking process. Immediately press STOP, remove
the baking tin and let the appliance cool down to room temperature.
• [ E00 ]
indicates that the temperature in the process chamber is too low.
Immediately press STOP, open the lid and let the appliance warm up for
10–20 minutes.
Two other error messages may appear on the LCD screen.
• [ EEE ]
is an open circuit alarm, which indicates that the sensor connector
is loose, or the circuit/element is disconnected.
• [ HHH ]
is a short circuit alarm, which indicates a short circuit or that the
sensor connector is welded together.
In either of those cases, press STOP, disconnect the unit and call for service.