ASSEMBLY INSTRUCTIONS
94
B
Operation Check of the Loader
A
If the loader does not operate properly, check each
assembly process again.
A
Refer to operator’s manual for the operation of each
function of the loader.
C
Detect abnormal movement of the loader
Turn on the engine. Release your hand from the loader
lever and check the movement of the loader. If the
loader operates slowly up and down while operating
the tractor, turn off the tractor immediately. Check
connecting pump line hose and power beyond line
hose to verify that they are installed correctly to the
control valve.
C
Operation check of the loader lever
Make sure that the loader operates as shown below.
C
Operation check of the self-leveling function (if
equipped)
[M4-061, M4-071]
[M6060, M7060]
1. Put the self-level on/off lever in the lower position (self-
leveling is on). Make sure that the self-leveling
function is activated both when raising and lowering
the loader.
2. Put the self-level on/off lever in the upper position
(self-leveling is off). Make sure that the self-leveling
function is inactivated both when raising and lowering
the loader.
A
The self-level adjustment procedure is referred to
operator’s manual.
(1) Loader control lever
(A) Down and dump
(B) Dump
(C) UP and dump
(D) Up
(E) Roll back
(F) Down and roll back
(G) Down
(H) Float
(1) Self-level on/off lever
