ASSEMBLY INSTRUCTIONS
14
C
Connector assembly stay section
1. Fit the connector assembly stay to the left and right
main frame as shown in the figure.
A
At the time of assembly, use the holes which showing
on the picture.
2. Connect the hoses between the connector assembly
stay and the valve as shown in the figure.
(1) 2-M10 x 60 bolts
(2) 2-M10 nuts
(3) 2-M10 plain washers
(4) 2-M10 spring lock washers
(5) Connector assy stay
(A) Use these holes.
(1) Hydraulic hose
(Red, 500 mm (19.7 in.), 3/4-UNF and 3/4-UNF)
(2) Hydraulic hose
(Blue, 597 mm (23.5 in.), 3/4-UNF and 3/4-UNF)
(3) Hydraulic hose
(Yellow, 465 mm (18.3 in.), 3/4-UNF and 3/4-UNF)
(4) Hydraulic hose
(White, 559 mm (23.4 in.), 3/4-UNF and 3/4-UNF)
