ASSEMBLY INSTRUCTIONS
32
7. Connect the power beyond line hose to the valve.
A
Equipment or property damage could result if
instructions are not followed.
A
To verify the hoses, the power beyond line hose
should be installed to the green colored port and the
pump line should be installed to the orange colored
port of the valve.
A
If the pump line hose and power beyond line hose are
installed incorrectly, the tractor hydraulic pump may
experience malfunction.
8. Connect the return line tube.
A
Before tightening up the return line tube, loosen the
tee swivel run first and then temporarily tighten the
above 2 parts. Then tighten them up together.
C
Connector assembly stay section
1. Fit the connector assembly stay to the main frame with
the bolts and plain washers inserted from the outside
and the nuts and spring lock washers from the inside.
(1) Power beyond line hose with sleeve
(500 mm (19.7 in.), 3/4-UNF)
(2) Valve port marked with a green dot (Power beyond line)
(1) Return line tube (7/8-UNF)
(1) Return line tube (7/8-UNF)
(2) Tee, swivel run (7/8-UNF)
(1) 2-M10 x 60 bolts
(2) 2-M10 nuts
(3) 2-M10 plain washers
(4) 2-M10 spring lock washers
(5) Connector assy stay
