ASSEMBLY INSTRUCTIONS
10
4. Reinstall the muffler pipe with the original bolts (Left
side).
5. Reinstall the muffler cover with the original bolts (Left
side).
B
Tool Box (CAB MODEL)
1. Attach the tool box stay to the main frame LH using
bolts.
2. Attach the tool box to the stay using the original bolts
and M8 nuts.
ASSEMBLING CONTROL VALVE KIT [M4-
061, M4-071 TRACTOR]
B
Standard Valve (CAB) [M6870]
C
Hydraulic lines section
A
Before hose assembly, shift the range and creep gear
shift lever to creep position (if no creep position is
equipped, shift lever to L position).
A
With all the hoses connected to the valve, be certain
that all the hoses are out of contact with the other
hoses, the fittings and edges.
A
To verify the hoses, the power beyond line hose
should be installed to the green colored port and the
pump line should be installed to the orange colored
port of the valve.
A
If the pump line hose and power beyond line hose are
installed incorrectly, the tractor hydraulic pump may
experience damage.
A
Equipment or property damage could result if
instructions are not followed.
(1) 2-Bolts (original)
(2) Muffler pipe
(1) 2-Bolts (original)
(2) Muffler cover
(1) Tool box stay
(2) Tool box (Removed from the tractor)
(3) 2-M10 x 20 bolts with washer
(4) 2-M8 nuts
(5) 2-M8 x 30 bolts with washer (inside the box)
2-M8 plain washers (original) (inside the box)
