ASSEMBLY INSTRUCTIONS
40
2. Connect the hoses between the connector assembly
stay and the valve.
A
With all the hoses connected to the valve, be certain
that any of the hoses is out of close contact with the
other hoses, the fittings and edges.
A
If the above problem is found, correct the hoses to
remove their twist of loosen the nut shown in the figure
to readjust the fitting angle for avoiding such close
contact.
3. Attach the label on the back of the side frame (RH).
C
Controller and cables section
1. Remove the cover cap of the tractor.
2. Fit the controller stay 2 in position.
[M7998 (ROPS MODEL)]
(1) Hydraulic hose (Red 500 mm (19.7 in.), 3/4-UNF)
(2) Hydraulic hose (Blue 432 mm (17.0 in.), 3/4-UNF)
(3) Hydraulic hose (Yellow 520 mm (20.4 in.), 3/4-UNF)
(4) Hydraulic hose (White 485 mm (19.1 in.), 3/4-UNF)
(1) Fitting
(2) Nut
(1) Label of warning 8
(1) Cover cap
(1) Controller stay 2
(2) 2-M10 x 40 bolts
