33
ASSEMBLY INSTRUCTIONS
2. Connect the hoses between the connector assembly
stay and the valve.
A
With all the hoses connected to the valve, be certain
that any of the hoses is out of close contact with the
other hoses, the fittings and edges.
A
If the above problem is found, correct the hoses to
remove their twist of loosen the nut shown in the figure
to readjust the fitting angle for avoiding such close
contact.
C
Controller and cables section
1. Remove the cover cap of the tractor.
2. Fit the controller stay 2 in position.
[M7995 (ROPS MODEL)]
(1) Hydraulic hose (Red)
(2) Hydraulic hose (Blue)
(3) Hydraulic hose (Yellow)
(4) Hydraulic hose (White)
(A) Use the holes.
(1) Hydraulic hose (Red 500 mm (19.7 in.), 3/4-UNF)
(2) Hydraulic hose (Blue 597 mm (23.5 in.), 3/4-UNF)
(3) Hydraulic hose (Yellow 465 mm (18.3 in.), 3/4-UNF)
(4) Hydraulic hose (White 559 mm (22.0 in.), 3/4-UNF)
(1) Fitting
(2) Nut
(1) Cover cap
(1) Controller stay 2
(2) 2-M10 x 40 bolts
