ASSEMBLY INSTRUCTIONS
20
B
Self-Leveling Valve (CAB) [M6874] (if
equipped)
C
Hydraulic lines section
A
Before hose assembly, shift the range and creep gear
shift lever to creep position (if no creep position is
equipped, shift lever to L position).
A
With all the hoses connected to the valve, be certain
that all the hoses are out of contact with the other
hoses, the fittings and edges.
A
To verify the hoses, the power beyond line hose
should be installed to the green colored port and the
pump line should be installed to the orange colored
port of the valve.
A
If the pump line hose and power beyond line hose are
installed incorrectly, the tractor hydraulic pump may
experience damage.
A
Equipment or property damage could result if
instructions are not followed.
1. Remove 2 tractor bolts, attach the valve stay support
on the tractor.
2. Attach the valve to valve stay.
3. Attach the self-level valve stay assembly to the valve
stay support.
(1) Valve stay support
(2) 2-M10 x 25 bolts
(3) 2-M14 x 40 bolts
M14 bolt
Tightening torque
124 to 147 N-m
(1.3 to 1.5 kgf-m)
(91.5 to 108.4 ft-lbs)
(1) Valve stay
(2) Self-level valve
(3) 3-M10 x 60 bolts with washer
(1) Valve stay
(2) 2-M12 nuts
(3) 2-M12 spring lock washers
