15
ASSEMBLY INSTRUCTIONS
A
Make sure valve color mark, connector assembly cap
color and hose color band are matching.
A
With all the hoses connected to the valve, be certain
that any of the hoses is out of close contact with the
other hoses, the fittings and edges.
A
If the above problem is found, correct the hoses to
remove their twist by loosing the nut shown in the
figure and readjusting the fitting angle for avoiding
such close contact.
A
To prevent hose twisting both of hose ends are
connecting to adapter first then tighten.
C
Controller stand section
1. Remove the cover of the tractor.
A
At the time of removing the rivets, use screw driver to
loosen the screw then pull the rivets out.
2. Remove the holder.
(1) Fitting
(2) Nut
(1) 2-Rivets
(2) 3-Bolts with washers (with cap)
(3) Flange bolt
(4) Plain washer
(5) Console cover
(1) Holder
