63
ASSEMBLY INSTRUCTIONS
4. Pass the lever boot through the 3rd function control
lever.
A
Pass the harness through the boot.
A
If the harness is difficult to go through the boot, apply
a small amount of grease on the inside of the lever
boot in advance, pass it carefully through the boot and
finally wipe off the grease.
5. Install the 3rd function control lever as shown below,
and secure it with the nut.
6. Remove the plug from the console. Remove the
plastic fastener from the 3rd function on/off switch, and
attach the switch onto the console.
A
When removing the plastic fastener from the switch,
remain the rubber ring on the switch.
(1) Lever boot
(2) 3rd function control lever
(1) 3rd function control lever
(2) M14 nut
(A) Parallel
(1) Console
(2) Plug
(3) Switch
(1) Switch
(2) Plastic fastener
(3) Rubber ring
