KTM 690 Enduro R AUS/UK 2012, Руководство по ремонту

Страница: 19 / 234

6 FORK, TRIPLE CLAMP
17
202023-11
Warning
Danger of accidents
Reduced braking efficiency due to oil or grease on the
brake discs.
–
Always keep the brake discs free of oil and grease, and clean them with
brake cleaner when necessary.
–
Clean screw
6
and the wheel spindle.
–
Lift the front wheel into the fork, position it, and insert the wheel spindle.
–
Mount and tighten screw
6
.
Guideline
Screw, front wheel spindle M24x1.5 45 Nm
(33.2 lbf ft)
202022-11
–
Position the brake caliper and check that the brake linings are seated correctly.
–
Mount and tighten screws
7
.
Guideline
Screw, front brake caliper M8 25 Nm
(18.4 lbf ft) Loctite ® 243™
–
Release the rear of the vehicle.
–
Remove the motorcycle from the lift stand. ( p. 10)
202023-12
–
Pull the front brake and compress the fork forcefully a few times.
This aligns the fork legs.
–
Tighten screws
8
.
Guideline
Screw, fork stub M8 15 Nm
(11.1 lbf ft)
6.9 Servicing the fork
Condition
The fork legs have been removed.
201488-01
–
Disassemble the fork legs. ( p. 18)
–
Disassemble the cartridge. ( p. 21)
–
Disassemble the tap compression. ( p. 22)
–
Check the fork legs. ( p. 23)
–
Assemble the tap compression. ( p. 24)
–
Assemble the cartridge. ( p. 25)
–
Assemble the fork legs. ( p. 27)