KTM 690 Enduro R AUS/UK 2012, Руководство по ремонту

Страница: 50 / 234

9 SHOCK ABSORBER, SWINGARM
48
9.18 Assembling the piston rod
Preparatory work
–
Check the damper. ( p. 45)
300543-11
Main work
–
Clamp the piston rod with the heim joint in a vise.
Guideline
Use soft jaws.
–
Mount rubber buffer
1
and locking cap
2
.
300548-10
–
Position special tool
3
on the piston rod.
Mounting sleeve (T1515) ( p. 225)
–
Grease the seal ring and push seal ring retainer
4
on to the piston rod.
Lubricant (T625) ( p. 213)
–
Remove the special tool.
200572-11
–
Mount supporting plate
5
with the rounded side facing downward.
–
Mount the compression shim stack
6
with the smaller shims facing downward.
201270-10
–
Sand both sides of the piston on a surface plate using 1200-grit sandpaper.
–
Clean the piston.
–
Assemble the piston.
Guideline
View
A
Piston from above
View
B
Piston from below
300541-11
–
Mount the rebound shim stack
7
with the smaller shims facing upward.
–
Install supporting plate
8
.