KTM 690 Enduro R AUS/UK 2012, Руководство по ремонту

Страница: 150 / 234

17 ENGINE
148
300127-11
–
Insert the lock ring
3
into the groove with suitable pliers and check that it is
seated correctly.
17.5 Engine assembly
17.5.1 Installing transmission shafts
300087-10
–
Clamp the right section of the engine case.
Holder for engine assembly stand (75012001070) ( p. 218)
Support for engine assembly stand (75012001060) ( p. 218)
Engine assembly stand (61229001000) ( p. 217)
–
Make sure that both stop disks
1
are installed.
–
Mount the inner bearing race
2
on the countershaft.
300088-10
–
Lubricate all bearings.
–
Assemble the two transmission shafts and slide them into the bearing seats
together.
300089-10
–
Mount the upper shift fork
3
, the middle shift fork
4
, and the lower shift fork
5
.
Info
For the assembly of the middle shift fork
4
, the sliding gear of the
third/fourth gear must be lifted.
300090-10
–
Insert shift drum
6
into the bearing seat.
–
Hang the shift forks into the shift drum.