KTM 690 Enduro R AUS/UK 2012, Руководство по ремонту

Страница: 31 / 234

6 FORK, TRIPLE CLAMP
29
Info
The special tool must be used to prevent the adjusting tube from being
lifted and thus to prevent oil from reaching the piston rod.
201475-10
–
Lubricate the O-ring.
Lubricant (T158) ( p. 212)
–
Mount and tighten compression adjuster
C
.
Guideline
Compression adjuster M14x1 18 Nm
(13.3 lbf ft) Loctite ® 241
201478-10
–
Push the cartridge into the inner tube.
–
Mount and tighten screw
8
with the seal ring.
Guideline
Cartridge screw M12x1 25 Nm
(18.4 lbf ft)
Info
If the cartridge turns as well, press the piston rod slightly to the side.
200677-10
–
Clamp the fork vertically.
–
Fill it with fork oil.
Fork oil per fork
leg 620 ml
(20.96 fl. oz.) Fork oil (SAE 4) (48601166S1)
( p. 211)
Info
Pull out the piston rod and push back in a number of times to bleed the car-
tridge.
201476-10
–
Remove pin
D
of the special tool.
Gripping tool (T14026S1) ( p. 225)
–
Pull out the piston rod. Mount the spring. Mount the pin again.
200679-10
–
Pull the spring down. Mount the special tool on the hexagonal part.
Guideline
Spring rate
Soft 5.2 N/mm (29.7 lb/in)
Medium (standard) 5.4 N/mm (30.8 lb/in)
Hard 5.6 N/mm (32 lb/in)
Open-end wrench (T14032) ( p. 225)
–
Remove the special tool.
Gripping tool (T14026S1) ( p. 225)