KTM 690 Enduro R AUS/UK 2012, Руководство по ремонту

Страница: 120 / 234

17 ENGINE
118
302125-10
–
Take off the stepped washer and remove the half-washers
8
.
–
Take off the clutch cage.
300056-10
–
Remove needle bearing
9
and supporting plate
bk
.
17.3.24 Removing primary gear
300062-10
–
Plug the special tool into the crankshaft.
Protection cover (75029090000) ( p. 221)
–
Screw the special tool
1
on to the primary gear
2
.
Extractor (75029021000) ( p. 218)
–
Hold it using the special tool and pull off the primary gear by turning the screw in.
–
Remove the special tools.
17.3.25 Removing starter drive
300064-10
–
Remove the lock ring of the starter idler gear
1
and the torque limiter
2
.
–
Take off the starter idler gear
1
with the washers.
–
Remove the torque limiter
2
with the washers and needle bearing.
300065-10
–
Take off the free-wheel gear
3
.
–
Remove the woodruff key
4
and both needle bearings
5
.