KTM 690 Enduro R AUS/UK 2012, Руководство по ремонту

Страница: 104 / 234

16 LIGHTING SYSTEM, INSTRUMENTS
102
600612-10
–
Pull bulb socket
2
out of the reflector.
–
Pull parking light bulb
3
out of the bulb socket.
–
Insert a new parking light bulb in the bulb socket.
Parking light (W5W / socket W2.1x9.5d) ( p. 181)
–
Insert the bulb socket in the reflector.
–
Insert the protection cap.
Finishing work
–
Install the headlight mask with the headlight. ( p. 101)
–
Check the headlight setting. ( p. 100)
16.7 Changing the headlight bulb
Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease
before mounting.
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Remove the headlight mask with the headlight. ( p. 100)
600610-10
Main work
–
Pull off connector
1
.
–
Take off protection cap
2
of the headlight bulb.
600611-10
–
Detach spring bar
3
.
–
Remove headlight bulb
4
.
–
Insert a new headlight bulb into the headlight housing.
Headlight (H4 / socket P43t) ( p. 181)
–
Fix the headlight bulb in the headlight using the spring bar.
–
Mount the protection cap. Attach the connector.
Finishing work
–
Install the headlight mask with the headlight. ( p. 101)
–
Check the headlight setting. ( p. 100)
16.8 Changing the turn signal bulb
Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease
before mounting.