KTM 690 Enduro R AUS/UK 2012, Руководство по ремонту

Страница: 26 / 234

6 FORK, TRIPLE CLAMP
24
200685-10
–
Measure the run-out of the inner tube.
Run-out of inner tube
≤
0.20 mm (
≤
0.0079 in)
» If the measured value is greater than the specified value:
–
Replace the inner tube.
200632-10
–
Check the outer tube for damage.
» If damage is found:
–
Replace the outer tube.
200665-10
–
Check the surface of the sliding bushings.
» If the bronze-colored layer
A
under sliding layer
B
is visible:
–
Replace the sliding bushings.
200666-10
–
Check the spring length.
Guideline
Spring length with preload spacer(s) 472 mm (18.58 in)
» If the measured value is greater than the specified value:
–
Reduce the strength of the pretensioning bushes.
» If the measured value is less than the specified value:
–
Increase the strength of the preload spacers.
6.14 Assembling the tap compression
Info
The steps are identical for both fork legs.
201484-11
–
Mount O-ring
1
.
–
Lubricate the O-ring.
Lubricant (T158) ( p. 212)