KTM 50 SX 2017, Руководство пользователя

Страница: 29 / 104

10 TUNING THE CHASSIS
27
V00260-10
–
Position the shock absorber and rear wheel.
–
Mount and tighten screw

and nut

.
Guideline
Screw, bottom shock
absorber M10 45 Nm
(33.2 lbf ft) Loctite ® 243™
–
Remove the motorcycle from the lift stand. ( p. 34)
10.7 Measuring rear wheel sag unloaded
Preparatory work
–
Raise the motorcycle with a lift stand. ( p. 34)
0 0 A A
400988-10
Main work
–
Measure the distance
–
as vertical as possible
–
between the rear axle and a fixed
point, for example, a mark on the side cover.
–
Make a note of the value as measurement  .
Finishing work
–
Remove the motorcycle from the lift stand. ( p. 34)
10.8 Checking the static sag of the shock absorber
0 0 A A
0 0 B B
400989-10
–
Measure distance  of rear wheel unloaded. ( p. 27)
–
Hold the motorcycle upright with the aid of an assistant.
–
Measure the distance between the rear axle and the fixed point again.
–
Note down the value as dimension

.
Info
The static sag is the difference between measurements

and

.
–
Check the static sag.
Static sag (50 SX) 12 mm (0.47 in)
Static sag (50 SX Mini) 10 mm (0.39 in)
» If the static sag is less or more than the specified value:
–
Adjust the spring preload of the shock absorber. ( p. 28)