KTM 50 SX 2017, Руководство пользователя

Страница: 57 / 104

11 SERVICE WORK ON THE CHASSIS
55
11.40 Checking the throttle cable routing
Warning
Danger of accidents The throttle cable may slip out of the guide if routed incorrectly.
The throttle slide will then no longer be closed and the speed can no longer be controlled.
–
Make sure that the throttle cable routing and the play in throttle cable complies with the specification.
Preparatory work
–
Remove the seat. ( p. 46)
–
Turn the knurled screw on the fuel tap all the way clockwise.
–
Remove the fuel tank. ( p. 42)
H00097-01
Main work
–
Check the throttle cable routing.
The throttle cable must be routed to the carburetor behind the handlebars and
above the fuel tank bracket.
» If the throttle cable is not routed as specified:
–
Correct the throttle cable routing.
Finishing work
–
Install the fuel tank. ( p. 43)
–
Mount the seat. ( p. 47)
11.41 Checking the rubber grip
401197-01
–
Check the rubber grips on the handlebar for damage, wear, and looseness.
» If a rubber grip is damaged, worn, or loose:
–
Change and secure the rubber grip.
Grip adhesive (00062030051) ( p. 95)
11.42 Additionally securing the rubber grip
Preparatory work
–
Check the rubber grip. ( p. 55)
401198-01
Main work
–
Secure the rubber grip at two locations with the retaining wire.
Securing wire (54812016000)
Wire twister forceps (U6907854)
The twisted wire ends face away from the palms and are bent in toward the
rubber grip.