KTM 50 SX 2017 Скачать руководство пользователя

Страница: 69 / 104

WHEELS, TIRES

13.1

Removing the front wheel

Preparatory work

–

Raise the motorcycle with a lift stand. (

p. 34)

H01451-10

Main work

–

Remove screw



–

Loosen screws



H01452-10

Warning

Danger of accidents

Damaged brake discs reduce the braking effect.

–

Always lay the wheel down in such a way that the brake disc is not dam-
aged.

–

Holding the front wheel, withdraw the wheel spindle. Take the front wheel out of
the fork.

Info

Do not pull the hand brake lever when the front wheel is removed.

H00934-10

–

Remove spacers



13.2

Installing the front wheel

Warning

Danger of accidents

Oil or grease on the brake discs reduces the braking effect.

–

Always keep the brake discs free of oil and grease.

–

Clean the brake discs with brake cleaner when necessary.

H01198-10

–

Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:

–

Change the front wheel bearing.

–

Clean and grease the contact surfaces



of the spacers.

Long-life grease (

p. 95)

–

Insert the spacers.

H01452-11

–

Clean and grease wheel spindle.

Long-life grease (

p. 95)

–

Lift the front wheel into the fork, position it, and insert the wheel spindle.

The brake linings are correctly positioned.

Содержание 50 SX 2017









































































































Результаты поиска

Содержание 50 SX 2017

Отзывы:

Похожие инструкции для 50 SX 2017

Бренды по названию

Популярные бренды

KTM 50 SX 2017, Руководство пользователя

Результаты поиска

Содержание 50 SX 2017

Отзывы:

Похожие инструкции для 50 SX 2017

Бренды по названию

Популярные бренды