KTM 50 SX 2017 Скачать руководство пользователя

Страница: 22 / 104

RIDING INSTRUCTIONS

Note

Material damage

The vehicle may be damaged by incorrect procedure when parking.

Significant damage may be caused if the vehicle rolls away or falls over.
The components for parking the vehicle are designed only for the weight of the vehicle.

–

Park the vehicle on a firm and level surface.

–

Ensure that nobody sits on the vehicle when the vehicle is parked on a stand.

Note

Fire hazard

Hot vehicle components pose a fire hazard and explosion risk.

–

Do not park the vehicle near to materials which are highly flammable or explosive.

–

Allow the vehicle to cool down before covering it.

–

Apply the brakes on the motorcycle.

–

Press and hold the kill switch

while the engine is idling until the engine stops.

–

Turn the knurled screw on the fuel tap all the way clockwise.

–

Park the motorcycle on firm ground.

8.7

Transport

Note

Danger of damage

The parked vehicle can roll away or fall over.

–

Park the vehicle on a firm and level surface.

Note

Fire hazard

Hot vehicle components pose a fire hazard and explosion risk.

–

Do not park the vehicle near to materials which are highly flammable or explosive.

–

Allow the vehicle to cool down before covering it.

401475-01

–

Switch off the engine.

–

Use tension belts or other suitable devices to secure the motorcycle against acci-
dents or falling over.

8.8

Refueling

Danger

Fire hazard

Fuel is highly flammable.

The fuel in the fuel tank expands when warm and can escape if overfilled.

–

Do not refuel the vehicle in the vicinity of open flames or lit cigarettes.

–

Switch off the engine for refueling.

–

Make sure that no fuel is spilled; particularly not on hot parts of the vehicle.

–

If any fuel is spilled, wipe it off immediately.

–

Observe the specifications for refueling.

Warning

Danger of poisoning

Fuel is poisonous and a health hazard.

–

Avoid skin, eye and clothing contact with fuel.

–

Immediately consult a doctor if you swallow fuel.

–

Do not inhale fuel vapors.

–

In case of skin contact, rinse the affected area with plenty of water.

–

Rinse the eyes thoroughly with water, and consult a doctor in case of fuel contact with the eyes.

–

Change your clothing in case of fuel spills on them.

Содержание 50 SX 2017









































































































Результаты поиска

Содержание 50 SX 2017

Отзывы:

Похожие инструкции для 50 SX 2017

Бренды по названию

Популярные бренды

KTM 50 SX 2017, Руководство пользователя

Результаты поиска

Содержание 50 SX 2017

Отзывы:

Похожие инструкции для 50 SX 2017

Бренды по названию

Популярные бренды