KTM 50 SX 2017, Руководство пользователя

Страница: 49 / 104

11 SERVICE WORK ON THE CHASSIS
47
11.23 Mounting the seat
H01431-10
–
Hook the seat onto screw

, lower the seat at the rear, and push it forward.
Catch

hooks into the fuel tank.
H00066-11
–
Close quick release

.
11.24 Removing the air filter
Note
Engine damage
Unfiltered intake air has a negative effect on the service life of the engine.
Dust and dirt will enter the engine without an air filter.
–
Never start to use the vehicle without an air filter.
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance with the applicable regu-
lations.
Preparatory work
–
Remove the seat. ( p. 46)
H01432-10
Main work
–
Press the rear holding lugs  together slightly and swing the air filter box cover
upward. Pull out the front holding lug and take off the air filter box cover.
–
Take off the air filter.
11.25 Installing the air filter
H01477-10
Main work
–
Position the clean air filter.
–
Position the rear holding lug. Lower the air filter box cover and allow the front hold-
ing lug

to snap in.
Info
If the air filter is not correctly mounted, dust and dirt can enter the engine
and cause damage.
Finishing work
–
Mount the seat. ( p. 47)