KTM 50 SX 2017, Руководство пользователя

Страница: 84 / 104

16 SERVICE WORK ON THE ENGINE
82
Info
Drain gear oil with engine at operating temperature.
Preparatory work
–
Stand the motorcycle on the plug-in stand on a horizontal surface.
H00145-10
Main work
(50 SX)
–
Place a suitable container under the engine.
–
Remove the oil drain plug with magnet

.
–
Let the gear oil drain fully.
–
Thoroughly clean the oil drain plug with magnet.
–
Clean the sealing surface on the engine.
–
Mount and tighten the oil drain plug with magnet and seal ring.
Guideline
Oil drain plug with magnet M12x1.5 20 Nm
(14.8 lbf ft)
S00883-10
(50 SX Mini)
–
Place a suitable container under the engine.
–
Remove the oil drain plug with magnet

.
–
Let the gear oil drain fully.
–
Thoroughly clean the oil drain plug with magnet.
–
Clean the sealing surface on the engine.
–
Mount and tighten the oil drain plug with magnet and seal ring.
Guideline
Oil drain plug with magnet M12x1.5 20 Nm
(14.8 lbf ft)
H01460-10
–
Remove filler plug

and fill up with gear oil.
Gear oil 0.20 l (0.21 qt.) Gear oil (ATF Dexron 3) ( p. 93)
Info
Too little gear oil or poor-quality gear oil results in premature wear to the
transmission.
–
Mount and tighten filler plug  .
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result
in unconsciousness and death.
–
Always make sure there is sufficient ventilation when running the
engine.
–
Use an effective exhaust extraction system when starting or running the
engine in an enclosed space.
–
Start the engine and check that it is oil-tight.
Finishing work
–
Check the gear oil level. ( p. 81)
16.5 Adding gear oil
Info
Too little gear oil or poor-quality gear oil results in premature wear to the transmission.