Krone KR 130 B, Оригинальное руководство по эксплуатации

Страница: 35 / 98

33
There are lugs (2) located in the twine box (1) above
the rolls of twine, through which the twine must be fed
before the individual rolls of twine (I to VI) are tied.
Tie the rolls of twine as follows:
(see Fig. KR-0-109 solid line)
End Start
Roll of Twine Roll of Twine
I III
III V
(see Fig. KR-0 -109 broken line)
End Start
Roll of Twine Roll of Twine
II IV
IV VI
The knot used when tying the rolls of twine must be
kept small so that it can be fed smoothly through twine
lugs and through the starter mechanism.
On the left hand side of the twine box the twine is fed
through holes (1) in the floor of the twine box into the
twine holder (2).
KR-0-007
3
1
2
KR-0-109
1
2
KR-0-009