manualshive.com logo in svg

Krone Big Pack 4x4, Руководство оператора

Поделиться
Скачать
Krone Big Pack 4x4 Скачать руководство пользователя страница 250

Maintenance

 

 

250 

 

Pos: 36.33 /Überschriften/Überschriften 2/F-J/Hydraulik @ 0\mod_1199776034950_78.docx @ 34205 @ 3 @ 1 

 

12.9 Hydraulics 

 

Pos: 36.34 /BA/Sicherheit/Hydraulik/Gefahr - Arbeiten an der Hydraulikanlage @ 0\mod_1197279394885_78.docx @ 17063 @  @ 1 

 

 

Danger! - Caution with leaking lines 

Effect: Danger to life, injuries or damage to the machine. 
• 

When searching for leaks, use suitable aids, always use suitable tools and wear 
protective goggles to avoid the risk of injury! 

• 

Escaping high-pressure fluids can penetrate the skin and cause serious injury. Therefore, 
you must depressurise the system before disconnecting lines. 

• 

Hydraulic oil escaping from a small opening can barely be seen. Because of this you 
should use a piece of cardboard or something similar when searching for leaks. Protect 
your hands and body. 

• 

If any fluid penetrates the skin, it must be removed immediately by a doctor who is 
familiar with this kind of injury; serious infections could otherwise result. Physicians who 
are not familiar with this area should consult appropriate information from a competent 
medical source. 

• 

Check the hydraulic hose lines at regular intervals and replace them if damaged or worn! 
The replacement lines must comply with the requirements of the device manufacturer. 

• 

Ensure that all line connections are tight before the pressure in the system builds up 
again. 

• 

Repair work on the hydraulic system must only be performed by authorised KRONE 
professional workshops. 

 

Pos: 36.35 /BA/Wartung/Großpackenpressen/Hydraulikanlage / Bordhydraulik/Hinweis zu Hydraulikarbeiten @ 24\mod_1241518053726_78.docx @ 245734 @  @ 1 

 

 

Note 

• 

When working on the hydraulic system, absolute cleanliness is essential 

• 

Check the hydraulic oil level each time before placing the machine in operation 

• 

Observe the intervals for replacing the hydraulic oil and hydraulic oil filter 

• 

The used oil must be disposed of correctly 

 

Pos: 36.36 /BA/---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Содержание Big Pack 4x4













































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды