Krone Big Pack 4x4 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 332

Krone Big Pack 4x4 Скачать руководство пользователя страница 14

Introduction

14

Pos: 11.14.1 /Überschriften/Überschriften 2/A-E/Bestimmungsgemäßer Gebrauch (alt) @ 0\mod_1196401545090_78.docx @ 7728 @ 2 @ 1

3.5

Intended Use

Pos: 11.14.2 /BA/Einleitung/Bestimmungsgemäßer Gebrauch/Grosspackenpresse/Bestimmungsgemäßer Gebrauch BiG Pack @ 93\mod_1327324692481_78.docx @ 787043 @ @ 1

The Big Pack square baler is built exclusively for customary use in agricultural work (see the
introduction "Intended Use").
The machine must only be used by persons who meet the requirements listed in the chapter on
safety "Personnel Qualifications and Training".
These operating instructions are part of the machine. The machine is designed exclusively for
use in accordance with these operating instructions.
Using the machine for work or applications that are not described in these operating instructions
can lead to severe injuries or death of persons and damage to the machine and other property.
Such work and applications are prohibited.

Pos: 11.14.3 /BA/Einleitung/Bestimmungsgemäßer Gebrauch/Nicht bestimmungs gemäss (2012-03-19 16:41:15) @ 0\mod_1196401324340_78.docx @ 7690 @ @ 1

Any use of the machine for other purposes is deemed not to be in accordance with intended
use. The manufacturer shall not be liable for any resulting damage; the user alone shall bear
the risk.
Operation in accordance with intended use also includes observing the operating, maintenance
and service instructions specified by the manufacturer.
Unauthorised modifications to the machine may affect the properties of the machine or disrupt
proper operation. For this reason, unauthorised modifications shall exclude any liability of the
manufacturer for consequential damage.

Pos: 11.15 /BA/---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

«
...
12
13
14
15
16
...
»

Содержание Big Pack 4x4













































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды