Krone Big Pack 4x4, Руководство оператора

Страница: 234 / 332

Settings
234
Pos: 34.81.32 /Überschriften/Überschriften 3/A-E/Anschlag Tastschwinge einstellen @ 107\mod_1334223782493_78.docx @ 964433 @ 3 @ 1
11.11.6 Adjusting the feeler rocker stop
Pos: 34.81.33 /BA/Einstellungen/Großpackenpresse/Variables Füllsystem VFS/BiG PACK 4x4/Anschlag Tastschwinge einstellen Bild BiG PACK 4x4 @ 107\mod_1334223888994_78.docx @ 964461 @ 2 @ 1
E
Fig. 171
Pos: 34.81.34 /BA/Einstellungen/Großpackenpresse/Variables Füllsystem VFS/BiG PACK 4x4/Anschlag Tastschwinge einstellen Text BiG PACK 4x4 @ 107\mod_1334223974681_78.docx @ 964489 @ @ 1
• Manually pull the feeler rocker (1) back, the VFS system actuates
• Rotate flywheel until the grooved ball bearing (5) is at the highest position (area “C”) of
the cam disc (7)
• Check that the tines (18) of the feeler rocker are outside (a) the packer tray (11)
• Check that the feeler rocker can still be pulled back manually by E= approx. 2 mm before
the feeler rocker hits the stop (10)
Note
If the tines (18) penetrate the packer tray when the VFS system is actuated, correct the length
of the threaded rod until the tines are outside the packer tray.
If the feeler rocker cannot be pulled back,
the stop (10) is blocking the rotating path of the feeler rocker or the absorbing mechanism is
obstructing the rotating path of the feeler rocker.
•
If the stop (10) is blocking the rotating path, adjust the stop (10)
• If the absorbing mechanism is obstructing the rotating path of the feeler rocker, adjust the
slotted brake jaw of the absorbing mechanism (see Settings section “Absorbing
mechanism”).
Adjusting the stop:
• Loosen the screws (19)
• Slide stop (10) until the dimension “E” = 3 – 8 mm.
• Tighten the screws (19)
Pos: 34.81.35 /BA/---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1