manualshive.com logo in svg

Krone Big Pack 4x4, Руководство оператора

Поделиться
Скачать
Krone Big Pack 4x4 Скачать руководство пользователя страница 203

 

Settings

 

203 

 

Pos: 34.43 /BA/Einstellungen/Großpackenpresse/Nadeleinstellungen/Einstellung der Obernadel Überschrift @ 21\mod_1239169795346_78.docx @ 230344 @  @ 1 

 

11.5 

Setting the upper needle  

Pos: 34.44 /BA/Einstellungen/Großpackenpresse/Nadeleinstellungen/Einstellung/Kontolle Obernadel Bild @ 21\mod_1239169831721_78.docx @ 230398 @ 2 @ 1 

 

 

Fig. 140 

Pos: 34.45 /BA/Einstellungen/Großpackenpresse/Nadeleinstellungen/Einstellung der Obernadel @ 21\mod_1239169307049_78.docx @ 230320 @ 33 @ 1 

 

The upper needle must be set so that the individual arms of the upper needles (1) are centred in 
the channel slot (2). This can be done by lining up on the ends of the upper needle shaft with 
shim rings. 

Pos: 34.46 /BA/Einstellungen/Großpackenpresse/Nadeleinstellungen/Kontrolle der Einstellung Obernadel @ 21\mod_1239167533580_78.docx @ 230269 @ 3 @ 1 

 

11.5.1 

Checking the setting of the upper needle  

• 

Trigger the tying process manually with machine at a standstill 

 

 

Note 

When manually triggering the tying process, make sure that there is tension on the tension arm 
(6). 

 
• 

Turn the flywheel manually until the upper needle (1) lifts 

• 

Just before the needle (4) catches the upper twine (3) engage the flywheel brake 

At this point in time, the upper twine should be centred in front of the needle (4). If this is not the 
case, the individual arm of the upper needle (1) must be corrected. 

Pos: 34.47 /BA/---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ 4 @ 1 

Содержание Big Pack 4x4













































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды