Krone Big Pack 4x4, Руководство оператора

Страница: 228 / 332

Settings
228
Pos: 34.81.8 /Überschriften/Überschriften 3/K-O/Nullstellung (VFS-System) @ 107\mod_1334225251167_78.docx @ 964914 @ 3 @ 1
11.11.2 Zero position (VFS system)
Pos: 34.81.9 /BA/Einstellungen/Großpackenpresse/Variables Füllsystem VFS/BiG PACK 4x4/Nullstellung Bild @ 107\mod_1334225327515_78.docx @ 964942 @ @ 1
Fig. 167
Pos: 34.81.10 /BA/Einstellungen/Großpackenpresse/Variables Füllsystem VFS/BiG PACK 4x4/Nullstellung Text @ 107\mod_1334225374626_78.docx @ 964970 @ @ 1
Manually rotate the packer in the direction of operation by turning the flywheel until the roller
(8) has engaged in the zeroizing device (9). (The VF system is now in the zero position.)
Note
The zero position has been correctly set when
•
the anvil (4) is positioned on the set screw (3)
• the middle of the roller of the grooved ball bearing (5) is positioned B = 10 mm from
the tip of the trigger cam disc (6) on the trigger cam disc
• the feeler rocker (1) is C = 10 – 15 mm from the edge of the packer tray (11)
Check settings and if required correct as follows:
•
Adjust the set screw (3) until the middle of the roller of the grooved ball bearing (5) is
positioned B = 10 mm from the tip of the trigger cam disc (6) on the trigger cam disc
Note
If dimension B cannot be set, check and, if required, adjust the absorbing mechanism
(see Settings section “Adjusting the absorbing mechanism”).
•
Adjust the threaded rod (2) until the feeler rocker (1) is C = 10 – 15 mm from the edge of
the packer tray (11)
Pos: 34.81.11 /BA/---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ 3 @ 1