manualshive.com logo in svg

Krone Big Pack 4x4, Руководство оператора

Поделиться
Скачать
Krone Big Pack 4x4 Скачать руководство пользователя страница 214

Settings

 

 

214 

 

Pos: 34.75.5 /Überschriften/Überschriften 3/A-E/Einstellung Garnhalter  @ 47\mod_1285054111875_78.docx @ 455539 @ 42 @ 1 

 

11.8.5 

Setting of twine retainer  

Pos: 34.75.6 /BA/Einstellungen/Großpackenpresse/Knoter/Doppelknoter/Garnhalter Doppelknoter Bild @ 24\mod_1241416073040_78.docx @ 243437 @  @ 1 

 

 

Fig. 153 

Pos: 34.75.7 /BA/Einstellungen/Großpackenpresse/Knoter/Garnhalter Text Einfachknoter / Doppelknoter Raspe @ 47\mod_1285053711171_78.docx @ 455513 @ 3 @ 1 

 

Setting the twine driver 

The function of the twine driver (5) depends on the position of its indentation opposite the twine 
disc cleaner (7). The twine driver (5) has been set to a = 0-2 mm as a default setting ex works. 

• 

If the indentation on the twine driver (5) is positioned too far forward (clockwise), 
the twine cannot be snagged by the twine driver as it is being guided along by the 
needle. 

• 

On the other hand, if the indentation on the twine driver (5) is positioned too far 
back (anticlockwise), the twine strand may become wound up on the knotter hook 
or it may not be possible for it to be snagged by the knotter tongue.  

Setting the twine driver (5) 

The indentation of the twine driver (5) has to be located at the position shown. 
Then: 
• 

Undo the nut (4) until the nut (4) is flush with the thread end of the auger 

• 

Undo the auger by means of a slight knock against the nut (4) 

• 

Adjust to a = 0-2 mm by turning the auger 

• 

Tighten nut (4) 

 

 

Note 

At least two tying processes must be performed to check for the correct position of the 
indentation. 

 

Pos: 34.75.8 /BA/---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Содержание Big Pack 4x4













































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды