manualshive.com logo in svg

Krone Big Pack 4x4, Руководство оператора

Поделиться
Скачать
Krone Big Pack 4x4 Скачать руководство пользователя страница 149

 

Start-up

 

149 

 

Pos: 28.1 /Überschriften/Überschriften 1/F-J/Inbetriebnahme @ 0\mod_1196327075811_78.docx @ 6375 @  @ 1 

 

8 Start-up 

 

Pos: 28.2 /BA/Sicherheit/Gefahrenhinweise/Inbetriebnahme/Gefahr -  Unvorhergesehene Inbetriebnahme_3 BiG Pack @ 17\mod_1236250951722_78.docx @ 204008 @  @ 1 

 

 

DANGER! - Accidental start-up of the machine, moving parts of the machine and / or 

unexpected movement of the machine! 

Effect: Danger to life, injuries or damage to the machine. 
• 

Special caution is required when mounting and detaching the machine on and from the 
tractor No one may stay between the tractor and machine. After successful coupling turn 
off the engine and pull out the ignition key. Apply the flywheel brake. 

• 

In service, maintenance, adjustment and repair work on the machine always switch the 
P.T.O. shaft off, turn off the engine and pull out the ignition key 

• 

Put the machine into operation only if all safety devices are attached and in protective 
position 

• 

The machine may be operated with a maximum P.T.O. speed of 1000 rpm 

• 

Only the universal shaft specified by the manufacturer with corresponding overload 
coupling and freewheel may be used 

• 

Mounting and detaching the universal shaft only with the P.T.O. shaft disengaged, the 
engine turned off and the ignition key withdrawn 

• 

Run hoses and connection cables so that they are not subject to tension when cornering 
or come into contact with the tractor wheels 

• 

Check hydraulic hose lines regularly and replace them in the case of damage or ageing 

• 

When connecting and removing the hydraulic hoses to and from the tractor hydraulics 
take care that the hydraulics are depressurised both on the tractor side and the machine 
side 

 

Pos: 28.3 /BA/---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Содержание Big Pack 4x4













































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды