manualshive.com logo in svg

Krone Big Pack 4x4, Руководство оператора

Поделиться
Скачать
Krone Big Pack 4x4 Скачать руководство пользователя страница 177

 

Operation

 

177 

 

Pos: 32.6.9 /BA/Einstellungen/Schneidwerk/Schneidwerk aktivieren BigPack @ 20\mod_1238594744307_78.docx @ 223814 @  @ 1 

 

10.2.3 

Activating the cutting system 

 

Fig. 112 
To activate the cutting system, the upper (1) and lower (2) blade control systems must at least 
be switched on (position 1) and the cutting system is moved up hydraulically as far as it will go. 

Pos: 32.6.10 /Überschriften/Überschriften 2/K-OMesserwechsel @ 8\mod_1219657285958_78.docx @ 119937 @  @ 1 

 

10.3 Blade 

Changing 

 

Pos: 32.6.11 /BA/Sicherheit/Schneidwerk/Warnung - Messerwechsel Handschuhe tragen @ 20\mod_1238595345166_78.docx @ 223904 @  @ 1 

 

 

WARNING! - Blade changing  

Effect: Severe injuries to fingers and hands 
• 

Wear protective gloves to remove / install blades! 

 

Pos: 32.6.12 /BA/Einstellungen/Schneidwerk/Messerwechsel allgemein Big Pack @ 20\mod_1238595529135_78.docx @ 223928 @ 2 @ 1 

 

Blades are changed on the right and left side of the machine. Jobs on the right hand side of the 
machine are described below. The same applies for the left hand side of the machine. 
 

Pos: 32.6.13 /BA/Einstellungen/Schneidwerk/Warnung Schneidwerk hochfahren @ 20\mod_1238595825370_78.docx @ 223952 @  @ 1 

 

 

Warning! – Raising the cutting system without retracted and locked cutting system 

halves  

Effect: Damage to the cutting system 
• 

Make sure that both cutting system halves are orderly retracted and locked before raising 
the cutting system 

 

Pos: 32.6.14 /BA/---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ 2344 @ 1 

Содержание Big Pack 4x4













































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды