Krone AM 203 S Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 74

background image

Operation

36

Pos: 23.8 /Überschriften/Überschriften 2/U-Z/VVor dem M äheinsatz @ 3\mod_1204788384465_78.docx @ 73168 @ 2 @ 1

8.2

Before mowing

Pos: 23.9 /BA/Sicher heit/7. Gefahrenhi nweise alt/Mähwer ke/Warnung - Uner wartete Bewegung der Schneidwer kzeug e bzw. des M ähwer kes @ 299\mod_1412937148121_78.docx @ 2341087 @ @ 1

WARNING!
Foreign bodies may be hurled up during the operation.

Thus there is a risk for persons

staying in the danger zone to be seriously hurt or killed.

Therefore the following points must be observed before the machine is used:

•  The mower must be in working position.
•  Move protective equipment into protective position and make sure that it is not damaged.
•  Replace damaged protective equipment immediately.
•  Instruct persons to leave the danger zone.
•  Special care should be taken when working near roads and buildings.
•  Make sure each time before the mower is used that blades, retaining bolts, leaf springs and

cutting discs or mower drums are not damaged, worn or missing; replace them, if

necessary!

Pos: 23.10 /BA/Bedienung /EasyC ut/Hi nweis Bei m M ähen Steuer ventil schwi mmstellung/senken @ 9 \mod_1220881412391_78.docx @ 128661 @ @ 1

Note! - While mowing

Effect: Proper use of the machine
• Leave control unit(s) in the "Lower" or "Float position" position for work.

Pos: 23.11 /Ü berschriften/Ü berschriften 3/P-T/SSchutzeinrichtung her unter kl appen @ 9\mod_1220881079079_78.docx @ 128594 @ 3 @ 1

8.2.1

Folding down the Safety Device

Pos: 23.12 /BA/Sicherheit/7. Gefahr enhinweise alt/M ähwer ke/Gefahr - F ortschleudern von Steinen @ 84\mod_1318311844997_78.docx @ 733435 @ @ 1

DANGER!

– Stones forcibly projected during operation

Effect: Danger to life or serious injuries.
• Check the guard cloths regularly. Worn or damaged guard cloths must be replaced!
• The protective equipment on the mowing unit, e.g. cloths and hoods, protects against flying

stones and similar objects, and also prevents access to dangerous parts. Because of this,

you must always move it to its protective position before starting work

• Fold the side plate(s) down and secure with twist locks before use

Pos: 23.13 /Layout Module /---------------Seitenumbr uch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

«
...
34
35
36
37
38
...
»

Содержание AM 203 S











































































Отзывы:

Нет отзывов

Похожие инструкции для AM 203 S

Бренд: Murray Страницы: 20

Бренд: MTD Страницы: 28

Collector 543e Mono

Бренд: Stiga Страницы: 39

44 968999551, 50 968999552, 44

Бренд: Dixon Страницы: 88

Бренд: Troy-Bilt Страницы: 24

Бренд: Swisher Страницы: 16

Бренд: Textron Страницы: 26

Бренд: Yard force Страницы: 16

Бренд: Dixon Страницы: 48

Бренд: Walker Страницы: 92

Бренд: Toro Страницы: 12

Бренд: Worx Nitro Страницы: 75

Бренд: KLIPPO Страницы: 60

Бренд: Talex Страницы: 61

Бренд: Yard-Man Страницы: 36

Бренд: Adano Страницы: 128

Бренд: Cramer Страницы: 9

Бренд: IHI Shibaura Страницы: 51

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды