Krone AM 203 S Скачать руководство пользователя страница 63 | Manualshive

Страница: 63 / 74

background image

Maintenance

– lubrication chart

63

Pos: 29.36.1 /Ü berschriften/Ü berschriften 1/U-Z/Wartung - Schmierpl an @ 0\mod_1197359304198_78.docx @ 18232 @ 1 @ 1

11

Maintenance

– lubrication chart

Pos: 29.36.2 /Ü berschriften/Ü berschriften 2/P-T/SSpezi elle Sicher hei tshi nweise @ 0\mod_1196660495760_78.docx @ 9134 @ 2 @ 1

11.1

Special Safety Instructions

Pos: 29.36.3 /BA/Sicherheit/7. Gefahr enhinweise alt/M ähwer ke/War nung - R eparatur _Wartung_R einigungs_4 allgemei n EasyCut @ 292\mod_1410941423112_78.docx @ 2299026 @ @ 1

WARNING!
When performing repair, maintenance or cleaning work or in case of technical
intervention, drive elements may start moving (caution: cutting discs continue to run).

Effect: Danger to life, injuries or damage to the machine.
•  Turn off the PTO shaft.
•  Move the machine to the working position and lower it to the ground.
•  Switch off the engine of the tractor, remove the ignition key and carry it with you.
•  Secure the tractor against accidental start-up and against rolling.
•  After the repair, maintenance, cleaning work or technical modifications are completed,

mount all protective covers and safety devices properly again.

• Avoid skin contact with oils, greases, cleaning agents and solvents.
• In the event of injuries or burns due to oils, cleaning agents or solvents, contact a physician

immediately.

• All other safety instructions must also be followed to avoid injuries and accidents.

Pos: 29.36.4 /Ü berschriften/Ü berschriften 2/F-J/GGel enkwelle @ 0\mod_1199781879794_78.docx @ 34542 @ 2 @ 1

11.2

PTO shaft

Pos: 29.36.5 /BA/Wartung/Gelenkwelle schmi eren/Abschmi eren Gel enkwelle AM @ 70\mod_1305181059201_78.docx @ 635935 @ @ 1

AMS-1-048

Fig. 37
Lubricate the PTO shafts at the intervals indicated in the drawing with a multi-purpose grease.

Follow the operating instructions of the PTO shaft manufacturer.

Pos: 29.36.6 /Layout Module /---------------Seitenumbr uch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

«
...
61
62
63
64
65
...
»

Содержание AM 203 S











































































Отзывы:

Нет отзывов

Похожие инструкции для AM 203 S

Бренд: Yard Machines Страницы: 20

Бренд: MasterCraft Страницы: 24

Бренд: Dixon Страницы: 48

Бренд: Baroness Страницы: 172

Бренд: Bush Hog Страницы: 19

Landroid WR142E

Бренд: Worx Страницы: 104

Бренд: McCulloch Страницы: 60

Бренд: Cub Cadet Страницы: 32

Бренд: Walker Страницы: 88

Бренд: Simplicity Страницы: 72

Бренд: Simplicity Страницы: 80

Бренд: Kobalt Страницы: 21

Hand Push Roller Mower

Бренд: The Handy Страницы: 12

Бренд: Wolf Garten Страницы: 31

Бренд: MTD Страницы: 20

Бренд: MTD Страницы: 20

Бренд: sunjoe Страницы: 20

Бренд: EINHELL Страницы: 195

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды