Krone AM 203 S Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 74

background image

Start-up

31

Pos: 19.19 /Ü berschriften/Ü berschriften 2/F-J/GGel enkwelle @ 0\mod_1199781879794_78.docx @ 34542 @ 2 @ 1

6.3

PTO shaft

Pos: 19.20 /BA/Sicherheit/Gel enkwell e/Gefahr - Sich drehende Gel enkwelle_2 @ 0\mod_1199781692950_78.docx @ 34523 @ @ 1

Danger! - Rotating PTO shaft

Effect: Danger to life or serious injuries
• Install or detach the PTO shaft only with the engine switched off and the ignition key

removed.

• Secure the tractor against rolling.
• Make sure that the PTO shaft is coupled properly (the lock of the PTO shaft must have

snapped in).

•  Make sure that the protective devices are attached properly.
•  Never use a PTO shaft, the protective devices of which have not been attached.
•  Replace damaged protective devices immediately
•  Attach the safety chain of the PTO shaft so that the guard tube does not rotate

simultaneously with the PTO shaft.

Pos: 19.21 /BA/Sicherheit/Gel enkwell e/Gefahr - F alsche Z apfwellendr ehzahl 540 U /mi n @ 9\mod_1220868351329_78.docx @ 128138 @ @ 1

Danger! - Incorrect PTO speed

Effect: Danger to life, serious injuries or damage to the machine.
• This machine may only be driven with a max. PTO speed of 540 rpm.
• Before switching on the PTO, make sure that you have selected the correct PTO speed.

Pos: 19.22 /BA/Sicherheit/Gel enkwell e/Achtung - Schwenkber eich/Freir aum über prüfen @ 9\mod_1220536308930_78.docx @ 126898 @ @ 1

Caution! - Swivel range of the PTO shaft

Effect: Damage to the tractor or the machine
• Check the swivel range and clearance of the PTO shaft!

Pos: 19.23 /Ü berschriften/Ü berschriften 2/F-J/GGel enkwelle monti eren @ 2\mod_1202398342788_78.docx @ 59253 @ 2 @ 1

6.4

Install the PTO shaft

Pos: 19.24 /BA/Inbetri ebnahme/M ähwer ke AM Baureihe/Anbau Gelenkwelle Bild AM 203S/243S/283S/323S @ 69\mod_1305097171590_78.docx @ 633167 @ @ 1

Fig. 11

Pos: 19.25 /BA/Inbetri ebnahme/M ähwer ke AM Baureihe/Anbau Gelenkwelle T ext AM 203S/243S/283S/323S @ 69\mod_1305098440007_78.docx @ 633195 @ @ 1

• Push the PTO shaft (1) with the overload coupling (2) onto the disc mower gear input shaft

towards the disc mower and secure it in place

• Slide the PTO shaft (1) onto the PTO end of the tractor and secure it

Make sure all locks of the PTO shaft have snapped in.

• Secure the PTO shaft guard against turning with the retaining chain

Pos: 19.26 /Layout Module /---------------Seitenumbr uch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

«
...
29
30
31
32
33
...
»

Содержание AM 203 S











































































Отзывы:

Нет отзывов

Похожие инструкции для AM 203 S

Бренд: Yard Machines Страницы: 12

Бренд: Poulan Pro Страницы: 48

Z Master 74902TE

Бренд: Toro Страницы: 80

Бренд: Poulan Pro Страницы: 52

Бренд: Supaswift Страницы: 12

Бренд: Tanaka Страницы: 57

eclipse 2 InCommand

Бренд: Jacobsen Страницы: 86

Бренд: KLIPPO Страницы: 132

Бренд: Snapper Страницы: 56

Бренд: Yard-Man Страницы: 18

Бренд: Earthwase Страницы: 20

Бренд: Ariens Страницы: 6

Бренд: Yard-Man Страницы: 12

Бренд: Kärcher Страницы: 17

Бренд: VITO GARDEN Страницы: 66

Бренд: Husqvarna Страницы: 47

Бренд: Husqvarna Страницы: 64

Бренд: Husqvarna Страницы: 56

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды