Krone AM 203 S Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 74

background image

Safety

12

Pos: 13.6.1 /BA/Sicherheit/Personalqualifi kati on und -schul ung @ 0\mod_1195639383185_78.docx @ 1136 @ 3 @ 1

4.2.1

Personnel Qualification and Training

The machine may be used, maintained and repaired only by persons who are familiar with it

and have been instructed about the dangers connected with it. The operator must define areas

of responsibility and monitoring of personnel. Should personnel lack the required knowledge,

they must receive the required training and instruction. The operator must ensure that the

contents of these operating instructions have been fully understood by personnel.
Repair work not described in these operating instructions should only be performed by

authorised service centres.

Pos: 13.6.2 /BA/Sicherheit/Gefahr en bei Nichtbeachtung der Sicherheitshinweise @ 0\mod_1195639434013_78.docx @ 1155 @ 3 @ 1

4.2.2

Dangers in Case of Non-compliance with the Safety Instructions

Failure to follow the safety instructions could result in personal injury and environmental

hazards as well as damage to the machine. If the safety instructions are not respected, this

could result in the forfeiture of any claims for damages.
Failure to follow the safety instructions could result,

for example

, in the following hazards:

•  Endangering of persons due to not protected working areas.
•  Breakdown of important machine functions
•  Failure of prescribed methods for repair and maintenance
•  Endangering of persons due to mechanical and chemical effects
•  Damage to the environment due to leaking hydraulic oil

Pos: 13.6.3 /BA/Sicherheit/Sicher hei tsbewusstes Arbeiten_T eil1 @ 0\mod_1195639792576_78.docx @ 1174 @ 3 @ 1

4.2.3

Safety-conscious work practices

Always observe the safety instructions set out in these operating instructions, all existing

accident prevention rules and any internal work, operating and safety rules issued by the

operator.
The safety and accident prevention regulations of the responsible professional associations are

binding.
The safety instructions provided by the vehicle manufacturer should also be observed.
Observe the applicable traffic laws when using public roads.
Be prepared for emergencies. Keep the fire extinguisher and first aid box within reach. Keep

emergency numbers for doctors and fire brigade close to the telephone.

Pos: 13.6.4 /Layout M odule /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

«
...
10
11
12
13
14
...
»

Содержание AM 203 S











































































Отзывы:

Нет отзывов

Похожие инструкции для AM 203 S

Бренд: Agri-Fab Страницы: 32

Бренд: Bad Boy Страницы: 46

Бренд: Gardena Страницы: 56

Бренд: Gardena Страницы: 4

LazerCut LCS405

Бренд: SANLI Страницы: 19

Бренд: Baroness Страницы: 172

Бренд: Feider Machines Страницы: 22

Бренд: Stihl Страницы: 436

Бренд: Snapper Страницы: 67

23HP Z-Force 60

Бренд: Cub Cadet Страницы: 32

Бренд: Bad Boy Страницы: 48

Бренд: Ferris Страницы: 60

Pro Force Groundsmaster 3280-D

Бренд: Toro Страницы: 8

Бренд: MTD Страницы: 8

DR WHISPER LITE

Бренд: Country Home Products Страницы: 38

Бренд: Sealey Страницы: 4

Scamper HG GDB10025

Бренд: Great Dane Страницы: 88

ZT 915100 - 1732

Бренд: Gravely Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды