Krone AM 203 S Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 74

background image

Commissioning

23

Pos: 17.1 /Überschriften/Überschriften 1/A-E/Erstinbetriebnahme @ 0\mod_1196314201498_78.docx @ 5855 @ 1 @ 1

5

Commissioning

Pos: 17.2 /BA/Sicher heit/6. Ü ber arbeitete War nhi nweise/Hi nweis - Vor der Ersti nbetri ebnahme den Ölstand kontr ollieren @ 469\mod_1470668635189_78.docx @ 3167988 @ @ 1

Note

Before placing the machine in operation for the first time, the oil level must be checked in all

gearboxes.

Pos: 17.3 /Überschriften/Überschriften 2/A-E/EErstmontag e @ 1\mod_1202226261982_78.docx @ 58270 @ 2 @ 1

5.1

First installation

Pos: 17.4 /BA/Ersti nbetriebnahme/Erstmontage @ 1\mod_1202224111998_78.docx @ 58190 @ @ 1

The document "Assembly Instructions" describes how to install the device for the first time.

Pos: 17.5 /Überschriften/Überschriften 2/P-T/SSpeziell e Sicherheitshinweise @ 0\mod_1196660495760_78.docx @ 9134 @ 2 @ 1

5.2

Special Safety Instructions

Pos: 17.6 /BA/Sicher heit/6. Ü ber arbeitete War nhi nweise/Warnung- Einstell arbeiten Maschi nen @ 297\mod_1412757509120_78.docx @ 2333197 @ @ 1

WARNING!

When performing repair, maintenance or cleaning work on the machine, or in case of
technical intervention, drive elements may start moving.

Thus there is a risk of serious

injuries or death.

•  Switch off tractor engine, remove the ignition key and carry it with you.
•  Secure the tractor against accidental start-up and against rolling.
•  Wait until all machine parts have come to a complete stop and have been cooled down

completely.

Pos: 17.7 /BA/Sicher heit/7. Gefahrenhi nweise alt/Gefahr - Fehler hafter Zusammenbau @ 1\mod_1202224212591_78.docx @ 58171 @ @ 1

Danger! - Incorrect assembly

Effect: Danger to life, serious injuries or serious damage to the machine.
•  Only authorised service centres may assemble the machine.
•  The machine must be assembled with special care.
•  Always heed the applicable accident prevention regulations.
•  Use only safe and sufficiently dimensioned lifting equipment and load-securing equipment.
•  The machine may be taken into operation only after all the safety devices have been

installed.

• If unauthorised modifications are made to the machine, the manufacturer is released from

liability for any resulting damage.

Pos: 17.8 /BA/Sicher heit/7. Gefahrenhi nweise alt/Gefahr - Fehlende Schutztücher Ersti nbetri ebnahme @ 3\mod_1204628072251_78.docx @ 71025 @ @ 1

Danger! - Missing guard cloths

Effect: Danger to life, serious injuries or serious damage to the machine.

• Before starting up the machine for the first time, install all supplied guard cloths on the

machine.

Pos: 17.9 /Layout M odul e /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

«
...
21
22
23
24
25
...
»

Содержание AM 203 S











































































Отзывы:

Нет отзывов

Похожие инструкции для AM 203 S

Бренд: EarthQuake Страницы: 36

Бренд: Yard force Страницы: 45

Бренд: Lawn-Boy Страницы: 20

Бренд: Lawn-Boy Страницы: 16

Бренд: Ransomes Страницы: 36

GLM 40/140 P EASY

Бренд: F.F. Group Страницы: 96

Бренд: Toro Страницы: 4

Бренд: Toro Страницы: 48

Бренд: Cub Cadet Страницы: 20

73449 Wheel Horse 314-8

Бренд: Toro Страницы: 44

Бренд: Yazoo/Kees Страницы: 46

Бренд: Electrolux Страницы: 18

Бренд: Electrolux Страницы: 15

Бренд: Electrolux Страницы: 15

Бренд: Electrolux Страницы: 21

QUICKSILVER 46S

Бренд: Electrolux Страницы: 10

Бренд: Electrolux Страницы: 8

Ride on lawn mower

Бренд: Electrolux Страницы: 27

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды