Krone AM 203 S Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 74

background image

Driving and Transport

33

Pos: 21.1 /Überschriften/Überschriften 1/F-J/F ahr en und Transport @ 0\mod_1196330049217_78.docx @ 6553 @ 1 @ 1

7

Driving and Transport

Pos: 21.2 /BA/Sicher heit/Fahren und Transport/Warnung - Transport / Str aßenfahrt @ 295\mod_1412076613597_78.docx @ 2318257 @ @ 1

WARNING! - Transport travel on roads

Accidents may occur when the following points are not observed during transport travel on

roads. Thus there is a risk of serious injuries or death.
• When driving on public roads, the provisions of the Road Traffic Licensing Regulations

must be adhered to (lighting, identification, axle loads, permissible measurement of

additional housing component, etc.)!

•  When being transported on public roads, the mower must be lifted.
•  In the transport position of the mower, always observe the larger height of the vehicle.
•  Riding on the mower is not permitted.

Pos: 21.3 /BA/Sicher heit/Fahren und Transport/Absperrhahn/Transport / Str aßenfahr t Absperr hahn schließ en/Schutz ei nrasten EC 280/320 @ 10\mod_1221540227604_78.docx @ 134129 @ @ 1

Danger! - Transport / road travel

Effect: Danger to life, serious injuries or serious damage to the machine.
• In transport position, always close the hydraulic shut-off valve.
• Always make certain that the lock (1) has snapped into place.

Pos: 21.4 /Überschriften/Überschriften 2/U-Z/VVon Arbeitsstellung i n Tr ansportstellung @ 2\mod_1202466246542_78.docx @ 59681 @ 2 @ 1

7.1

Switching from working position to transport position

Pos: 21.5 /BA/Sicher heit/6. Ü ber arbeitete War nhi nweise/Warnung-Hochschwenken des M ähwer ks i n Tr ansportstellung @ 291\mod_1410444332756_78.docx @ 2295038 @ @ 1

WARNING!
During the swivelling operation of the mower, persons may be gripped by the mower and
be seriously injured.

• Before swivelling the mower up into transport position, turn off the PTO shaft.
• Do not swivel up the machine until

• all machine parts have come to a complete stop.
• there is no one in the swivel range.

Pos: 21.6 /Layout M odul e /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

«
...
31
32
33
34
35
...
»

Содержание AM 203 S











































































Отзывы:

Нет отзывов

Похожие инструкции для AM 203 S

Бренд: Yard Machines Страницы: 44

Бренд: Yardworks Страницы: 21

Бренд: Dixie Chopper Страницы: 52

Бренд: Rally Страницы: 28

Бренд: COX Страницы: 90

Бренд: Alamo Industrial Страницы: 186

Бренд: Snapper Страницы: 1

Бренд: Flymo Страницы: 10

Бренд: Ozito Страницы: 8

Flex Cut RMR 230 H

Бренд: Wiedenmann Страницы: 55

Бренд: Yardworks Страницы: 7

Бренд: Snapper Страницы: 44

GRASS 1265 ZSBW

Бренд: Garland Страницы: 172

Бренд: Spear & Jackson Страницы: 24

Бренд: Toro Страницы: 72

Бренд: Hayter Страницы: 36

Бренд: Husqvarna Страницы: 56

Бренд: Weed Eater Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды