Krone AM 203 S Скачать руководство пользователя страница 65

Страница: 65 / 74

Placing in Storage

Pos: 31.1 /Überschriften/Überschriften 1/A-E/Ei nlag erung @ 0\mod_1197385459120_78.docx @ 19966 @ 1 @ 1

Placing in Storage

Pos: 31.2.1 /BA/Einl agerung/M aschine an ei nem trockenem Ort abstellen @ 70\mod_1305630069850_78.docx @ 638292 @ @ 1

• Park the machine in a dry location, but not in the vicinity of artificial fertilisers or livestock

buildings.

Pos: 31.2.2 /BA/Einl agerung/Vor der Ei nwinter ung die Maschi ne innen und auß en gr ündlich reinig en @ 70\mod_1305635346852_78.docx @ 638460 @ @ 1

• Before placing the machine in winter storage, clean inside and outside thoroughly. If you

use a high-pressure cleaner to do this. do not keep a stream of water directed at bearing

points. After cleaning is completed, lubricate all lubrication points. Do not

wipe off any

grease that comes out of bearing points. The hardened grease will provide additional

protection against moisture.

Pos: 31.2.3 /BA/Einl agerung/Gel enkwelle auseinanderziehen und ei nfetten @ 70\mod_1305631424563_78.docx @ 638348 @ @ 1

• Disassemble the PTO shaft. Lubricate the inner tubes and the guard tube with grease.

Grease the lubrication points on the cross joint and on the bearing rings of the guard tubes.

Pos: 31.2.4 /BA/Einl agerung/Alle Gel enkstellen einölen @ 70\mod_1305633347429_78.docx @ 638432 @ @ 1

• Oil all joint points!

Pos: 31.2.5 /BA/Einl agerung/Lackschäden ausbesser n, blanke Stellen gründlich mit R ostschutzmittel konser vi eren @ 70\mod_1305630900253_78.docx @ 638320 @ @ 1

• Touch up damaged paint and preserve all uncoated areas thoroughly with rust protection

agent.

Pos: 31.2.6 /BA/Einl agerung/Alle beweglichen Bauteile über prüfen @ 70\mod_1305632768685_78.docx @ 638404 @ @ 1

• Check all movable components such as deflector rollers, joints, tension rollers, etc. to make

certain they move easily. If necessary remove, clean, grease and remount. If necessary,

replace with new parts.

Pos: 31.2.7 /BA/Einl agerung/R eibkuppl ung/R eibkupplung stilleg en @ 70\mod_1305636454606_78.docx @ 638543 @ @ 1

• Shut down the overload coupling

Pos: 31.2.8 /BA/Einl agerung/Ver wenden Si e nur Original-KR ONE- Ersatzteile @ 70\mod_1305632212285_78.docx @ 638376 @ @ 1

•

Use only original KRONE replacement parts.

Pos: 31.2.9 /BA/Einl agerung/Sammelliste erstell en @ 70\mod_1305626681125_78.docx @ 638264 @ @ 1

Perform the necessary repair tasks during the time immediately after the harvest season. Draw

up a list of all replacement parts you will need. This will make it easier for your KRONE dealer to

process your orders and you will be certain that your machine will be ready for use at the

beginning of the next season.

Pos: 31.3 /Layout M odul e /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

Содержание AM 203 S











































































Результаты поиска

Содержание AM 203 S

Отзывы:

Похожие инструкции для AM 203 S

Бренды по названию

Популярные бренды

Krone AM 203 S, Оригинальная инструкция по эксплуатации

Результаты поиска

Содержание AM 203 S

Отзывы:

Похожие инструкции для AM 203 S

Бренды по названию

Популярные бренды